工业水处理 ›› 2003, Vol. 23 ›› Issue (7): 49-51. doi: 10.11894/1005-829x.2003.23(7).49

• 经验交流 • 上一篇    下一篇

发电厂含油废水处理系统的改造

许闽明, 骆建晖, 李康文   

  1. 广东省佛山市环境工程装备有限公司, 广东佛山 528000
  • 收稿日期:2002-05-10 出版日期:2003-07-20 发布日期:2010-10-01
  • 作者简介:许闽明(1971- ),1993年毕业于厦门大学,工程师。电话:(0757)3355842

Reformation of the treatment system for oil-bearing wastewater in power plants

Xu Minming, Luo Jianhui, Li Kangwen   

  1. Foshan Environmental Engineering Equipment Co., Ltd., Foshan 528000, China
  • Received:2002-05-10 Online:2003-07-20 Published:2010-10-01

摘要:

根据含油废水的特性,对应用物化隔油-破乳浮选-混凝气浮-粗粒化过滤-活性炭吸附工艺处理发电厂含油废水的情况进行了详细的介绍.多年的运行经验证明,在进水石油类为54.3~207.9mg/L的情况下,出水可降至0.6~1.6mg/L,去除率达99.2%.

关键词: 物化法, 含油废水, 废水处理

Abstract:

The application of isolating oil-broken emulsification floatation -coagulating gas floatage-coarse particle filtration -activated carbon adsorption technology to the treatment of oil-bearing wastewater in accordance with the property of it has been described in detail. After several years running, it shows that the average removal rate of oil can reach 99.2 % under the condition of inlet oil in the range of 54.3~207.9 mg/L.

Key words: physicochemical process, oil-bearing wastewater, wastewater treatment

中图分类号: