工业水处理 ›› 2017, Vol. 37 ›› Issue (8): 62-65. doi: 10.11894/1005-829x.2017.37(8).062

• 试验研究 • 上一篇    下一篇

糠醇基介孔碳对水中双酚A的吸附性能研究

王琳1, 赵军2   

  1. 1. 昆明冶金高等专科学校, 云南昆明 650033;
    2. 同济大学环境科学与工程学院, 长江水环境教育部重点实验室, 上海 200092
  • 收稿日期:2017-06-26 出版日期:2017-08-20 发布日期:2017-09-04
  • 通讯作者: 赵军,在读博士研究生,E-mail:zhaojuntju@126.com。 E-mail:zhaojuntju@126.com
  • 作者简介:王琳(1982-),讲师。E-mail:695951252@qq.com。

Study on the adsorption capacity of furfuryl alcohol based mesoporous carbon for bisphenol-A in water

Wang Lin1, Zhao Jun2   

  1. 1. Kunming Metallurgy College, Kunming 650033, China;
    2. Key Laboratory of Yangtze River Water Environment, Ministry of Education, College of Environmental Science and Engineering, Tongji University, Shanghai 200092, China
  • Received:2017-06-26 Online:2017-08-20 Published:2017-09-04

摘要: 采用3种多孔碳材料C-1、C-2和C-3对双酚A进行静态吸附实验,选用具有集中介孔分布、比表面积较大的C-3在不同温度和pH条件下对双酚A进行吸附。结果表明,当双酚A初始质量浓度为60 mg/L、温度为30℃时,C-3对双酚A的饱和吸附量达到279.4 mg/g。在相同条件、等电点附近,C-3对双酚A的去除率达到最大值47.4%,饱和吸附量达到284.5 mg/g。C-3对双酚A的吸附遵循拟二级动力学方程。

关键词: 介孔碳, 吸附, 双酚A

Abstract: Three kinds of mesoporous carbon materials,C-1,C-2 and C-3,have been used for implementing stat-ic adsorption experiments. C-3 with centralized mesoporous distribution and larger specific surface area has been chosen for adsorbing bisphenol-A under different temperature and pH conditions. The results show that the satu-rated adsorption capacity of C-3 for bisphenol-A reaches 279.4 mg/g when the initial mass concentration of bisphe-nol-A is 60 mg/L and the temperature 30℃. Under the same conditions and near the isoelectric point,the bisphe-nol-A removing rate by C-3 reaches the maximum value 47.4%,and saturated adsorption capacity reaches 284.5 mg/g. The C-3 adsorption for bisphenol-A complies with pseudo-second-order kinetics equation.

Key words: mesoporous carbon, adsorption, bisphenol-A

中图分类号: