摘要: 采用溶胶凝胶法将TiO2用Fe(Ⅲ)改性并负载玻璃微珠制得复合光催化剂,探讨煅烧时间、Fe-Ti原子比、煅烧温度等因素对催化性能的影响,确定最佳制备条件,并对其进行表征。结果表明,最佳制备条件:V钛酸丁酯∶V乙醇∶V硝酸∶V去离子水=5∶20∶0.4∶1,Fe-Ti原子比为4%,煅烧温度500 ℃,煅烧时间2 h。在自然光条件下反应0.5 d,TOC降解率复合催化剂比P25高8.61%。
关键词:
催化剂,
中空玻璃微珠,
铁掺杂二氧化钛,
废水处理
Abstract: The composite photo-catalyst has been made from TiO2 modified with Fe(Ⅲ)and coated on hollow glass microspheres by sol-gel method. The influences of the factors,such as the calcination time,Fe-Ti atomic ratio, calcination temperature,etc. on catalytic performances are discussed,the optimal preparation conditions determined and the composite photo-catalysts characterized. The results show that the optimum preparation conditions are as follows:V钛酸丁酯:V乙醇:V硝酸:V去离子水=5:20:0.4:1,Fe-Ti atomic ratio 4%,optimum calcination temperature 500 ℃, and optimum calcination time 2 h. After having reacted for 0.5 d under natural light,the TOC degradation rate of composite catalyst is 8.61% higher than that of P25.
Key words:
catalyst,
hollow glass microspheres,
Fe-doped TiO2,
wastewater treatment
中图分类号:
李桂菊, 张朕, 李弘涛, 田明, 李丽. 铁掺杂二氧化钛负载空微球光催化剂制备及应用[J]. 工业水处理, 2017, 37(7): 66-69.
Li Guiju, Zhang Zhen, Li Hongtao, Tian Ming, Li Li. Preparation of Fe-doped TiO2-coated hollow microspheres photo-catalyst and its application[J]. INDUSTRIAL WATER TREATMENT, 2017, 37(7): 66-69.