摘要：
用UV/TiO2法对炼油含碱废水进行预处理实验,TiO2以悬浮态存在于废水中,对油类有较高的去除率,且随着TiO2投加量的增加而升高。在本实验的条件下,在TiO2加入量为20g时,COD、酚类、NH3-N的平均去除率达到最高,分别为61%,58%,50%,此时,油的平均去除率为68%,但S2-的降解几乎不受TiO2影响,平均去除率在94%以上。实验表明,光催化氧化技术处理炼油含碱废水可达到预处理的目的,降解过程具有除臭、除色,快速高效,不产生污泥等优势。
关键词:
UV/TiO2法,
炼油含碱废水,
降解
Abstract:
The refinery alkali-containing wastewater is pretreated by using UV/TiO2.The removal rate of the oil is higher when TiO 2 is suspended in the wastewater,and it increases with the TiO2 dose.The average removal rate of COD,Ar-OH,NH3-N are61%,58%and50%respectively when the feeding amount of TiO2 is20g.The average removal rate of oil is68%.The degradation of S2- is hardly affected by TiO2.The average rate of it is more than94%.The result shows that it has advantages in decolorization,high and fast efficiency and no sludge appearance,etc.
Key words:
UV/TiO2,
refinery alkali-containing wastewater,
degradation
中图分类号:
张冬梅, 谢颖, 谢文玉, 卢文勇, 陈丽霞, 杨菊. UV/TiO2法对炼油含碱废水预处理的实验[J]. 工业水处理, 2003, 23(11): 59-60.
Zhang Dongmei, Xie Ying, Xie Wenyu, Lu Wenyong, Chen Lixia, Yang Ju. Exper iments of the pretreatment of refinery alkali-containing wastewater by using UV/TiO_2 method[J]. INDUSTRIAL WATER TREATMENT, 2003, 23(11): 59-60.