工业水处理 ›› 2009, Vol. 29 ›› Issue (8): 95-97. doi: 10.11894/1005-829x.2009.29(8).95

• 经验交流 • 上一篇    下一篇

浅谈酒钢不锈钢热轧浊环水处理工艺

张兆斌   

  1. 酒泉钢铁(集团)有限公司动力厂, 甘肃 嘉峪关 735100
  • 收稿日期:2009-05-05 修回日期:2009-05-05 出版日期:2009-08-20 发布日期:2010-10-01
  • 作者简介:张兆斌(1967- ),1989年毕业于武汉科技大学排水专业,现任酒钢动力厂给排水责任工程师.

Preliminary discussion on the treatment technology of JISCO stainless steel hot rolling turbid circulating water

Zhang Zhao-bin   

  1. Power Plant of Jiuquan Iron and Steel(Group) Co., Ltd., Jiayuguan 735100, China
  • Received:2009-05-05 Revised:2009-05-05 Online:2009-08-20 Published:2010-10-01

摘要:

介绍了酒钢公司不锈钢热轧工程浊循环水处理系统.该系统选择采用旋流沉淀池—化学除油—变间隙自清洗过滤器处理工艺,经处理后的浊环水水质达到悬浮物质量浓度为50mg/L、油质量浓度5mg/L,满足了工艺要求.该工艺在不锈钢热轧浊环水处理系统中起到了关键作用.

关键词: 热轧, 水处理, 沉淀

Abstract:

The treatment technology of hot rolling turbid circulating water in Jiuquan Iron & Steel Co.(JISCO) is introduced.By means of comparison, the treatment process of swirl sedimentation tanks-chemical oil removalspace changing self-cleaning filter has been selected and used.After the treatment the water quality of the turbid circulating water meets the process requirements, when the mass concentration of the suspended substances is 50 mg/L, and mass concentration of oil is 5 mg/L.This process has played a key role in JISCO stainless steel hot rolling circulating turbid water treatment system.

Key words: hot rolling, water treatment, sedimentation

中图分类号: