工业水处理 ›› 2021, Vol. 41 ›› Issue (2): 117-119. doi: 10.11894/iwt.2020-0263

• 工程实例 • 上一篇    下一篇

生猪屠宰企业废水处理工程实例

张进福(),李瑞芳,闫艳娥   

  1. 河南省绿韵环保科技有限公司, 河南郑州 450052
  • 收稿日期:2020-10-14 出版日期:2021-02-20 发布日期:2021-02-25
  • 作者简介:张进福(1983-), 工程师, 注册环保工程师。电话: 18134730883, E-mail: fuwork@163.com

Engineering examples of wastewater treatment for pig slaughter enterprises

Jinfu Zhang(),Ruifang Li,Yan'e Yan   

  1. Henan Lvyun Environmental Protection Technology Co., Ltd., Zhengzhou 450052, China
  • Received:2020-10-14 Online:2021-02-20 Published:2021-02-25

摘要:

屠宰废水是一种量大面广的高浓度有机废水,结合类似废水处理的工程经验和实验研究结果,本工程采用“厌氧反应器+Bardenpho+Fenton氧化”的主体工艺对此类废水进行处理。实际运行结果表明,该工艺处理效果好,运行稳定,最终出水水质能够达到《城镇污水处理厂污染物排放标准》(GB 18918—2002)中一级A规定的排放标准。

关键词: 屠宰废水, 厌氧反应器, Bardenpho工艺

Abstract:

Slaughtering wastewater is a type of high concentration organic wastewater with large amount and wide range. Based on the engineering experience and experimental research results of similar wastewater treatment, the main process of 'anaerobic reactor+Bardenpho+Fenton oxidation' was used to treat this wastewater. The actual operation results showed that this process had good treatment effect and stable operation, and the final effluent water quality met the first A discharge standard of the Pollutant Discharge Standard for Urban Sewage Treatment Plant(GB 18918-2002).

Key words: slaughter wastewater, anaerobic reactor, Bardenpho process

中图分类号: